Add to Favorites
Share

Carbon Steel SO Flanges

  • Description
Product Detail
    SLIP ON FLANGE RF / FF
    øDbgmJhkHoleslKg.
    1/2"88,911,134,930,222,315,960,3415,90,400
    3/4"98,412,742,938,127,715,969,8415,90,700
    1"107,914,350,849,234,517,579,4415,90,800
    1 1/4"117,515,963,558,843,220,688,9415,91,100
    1 1/2"127,017,573,065,149,522,298,4415,91,400
    2"152,419,092,177,862,025,4120,6419,02,200
    2 1/2"177,822,2104,890,574,728,6139,7419,03,600
    3"190,523,8127,0107,990,730,2152,4419,04,100
    3 1/2"215,923,8139,7122,2103,431,7177,8819,05,200
    4"228,623,8157,2134,9116,133,3190,5819,05,600
    5"254,023,8185,7163,6143,836,5215,9822,26,300
    6"279,425,4215,9192,1170,739,7241,3822,27,500
    8"342,928,6269,9246,1221,544,4298,4822,212,600
    10"406,430,2323,8304,8276,349,2361,91225,418,500
    12"482,631,7381,0365,1327,155,6431,81225,528,000
    14"533,434,9412,7400,0359,157,1476,21228,636,000
    16"596,936,5469,9457,2410,563,5539,71628,646,000
    18"635,039,7533,4504,8461,868,3577,81631,750,000
    20"698,542,9584,2558,8513,173,0635,02031,764,000
    22"749,346,0641,2609,6564,479,4692,12034,972,000
    24"812,847,6692,1663,6615,982,5749,32034,989,000

    NOTE:
    1. Class 150 flanges except Lap Joint will be furnished with 0.06 (1.6mm) raised face, which is included in ‘Thickness’ (C) and ‘Length through Hub’ (Y1), (Y3).
    2. For Slip-on, Threaded, Socket Welding and Lap Joint Flanges, the hubs can be shaped either vertical from base to top or tapered within the limits of 7 degrees.
    3. Blind Flanges may be made with the same hub as that used for Slip-on Flanges or without hub.
    4. The gasket surface and backside (bearing surface for bolting) are made parallel within 1 degree. To accomplish parallelism, spot facing is carried out according to MSS SP-9, without reducing thickness (C).
    5. Depth of Socket (D) is covered by ANSI B 16.5 only in sizes through 3 inch, over 3 inch is at the manufacturer’s option.

     

    ANSI, ASME, ASA, B16.5 300lb/sq.in. SLIP ON FLANGE RF / FF
    øDbgmJhkHoleslKg.
    1/2"95,614,334,938,122,322,266,7415,90,700
    3/4"117,515,942,947,627,725,482,5419,01,100
    1"123,817,550,854,034,527,088,9419,01,400
    1 1/4"133,319,063,563,543,227,098,4419,01,800
    1 1/2"155,620,673,069,849,530,2114,3422,22,600
    2"165,122,292,184,162,033,3127,0819,03,400
    2 1/2"190,525,4104,8100,074,738,1149,2822,24,400
    3"209,528,6127,0117,590,742,9168,3822,26,100
    3 1/2"228,630,2139,7133,3103,444,4184,1822,27,500
    4"254,031,7157,2146,0116,147,6200,0822,210,100
    5"279,434,9185,7177,8143,850,8234,9822,212,500
    6"317,536,5215,9206,4170,752,4269,91222,214,100
    8"381,041,3269,9260,3221,561,9330,21225,424,800
    10"444,547,6323,8320,7276,366,7387,31628,637,100
    12"520,750,8381,0374,6327,173,0450,81631,750,000
    14"584,254,0412,7425,4359,176,2514,32031,770,000
    16"647,757,1469,9482,6410,582,5571,52034,990,000
    18"711,260,3533,4533,4461,888,9628,62434,9112,000
    20"774,763,5584,2584,2513,195,2685,82434,9133,000
    22"838,266,7641,2641,2564,4101,6742,92441,3197,000
    24"914,469,8692,1701,7615,9106,4812,82441,3208,000

    NOTE:
    1. Class 300 flanges except Lap Joint will be furnished with 0.06 (1.6mm) raised face, which is included in ‘Thickness’ (C) and ‘Length through Hub’ (Y1), (Y3).
    2. For Slip-on, Threaded, Socket Welding and Lap Joint Flanges, the hubs can be shaped either vertical from base to top or tapered within the limits of 7 degrees.
    3. Blind Flanges may be made with the same hub as that used for Slip-on Flanges or without hub.
    4. The gasket surface and backside (bearing surface for bolting) are made parallel within 1 degree. To accomplish parallelism, spot facing is carried out according to MSS SP-9, without reducing thickness (C).
    5. Depth of Socket (D) is covered by ANSI B 16.5 only in sizes through 3 inch, over 3 inch is at the manufacturer’s option.

     

     SLIP ON FLANGE RF/ FF
    øDbgmJhkHoleslKg.
    1/2"95,214,334,938,122,322,266,7415,90,800
    3/4"117,515,942,947,627,725,482,5419,01,400
    1"123,817,550,854,034,527,088,9419,01,600
    1 1/4"133,320,663,563,543,228,698,4419,02,100
    1 1/2"155,622,273,069,849,531,7114,3422,23,100
    2"165,125,492,184,162,036,5127,0819,03,700
    2 1/2"190,528,6104,8100,074,741,3149,2822,25,400
    3"209,531,7127,0117,590,746,0168,3822,27,300
    3 1/2"228,634,9139,7133,3103,449,2184,1825,48,900
    4"273,038,1157,2152,4116,154,0215,9825,411,800
    5"330,244,4185,7188,9143,860,3266,7828,624,500
    6"355,647,6215,9222,2170,766,7292,11228,629,500
    8"419,155,6269,9273,0221,576,2349,21231,743,000
    10"508,063,5323,8342,8276,385,7431,81634,970,000
    12"558,866,7381,0400,0327,192,1488,92034,986,000
    14"603,269,8412,7431,8359,193,7527,02038,1100,000
    16"685,876,2469,9495,3410,5106,4603,22041,3142,000
    18"742,982,5533,4546,1461,8117,5654,02044,4175,000
    20"812,888,9584,2609,6513,1127,0723,92444,4232,000
    22"869,995,2641,2666,7564,4133,3777,92447,6292,000
    24"939,8101,6692,1717,5615,9139,7838,22450,8330,000

    NOTE:
    1. Class 600 flanges except Lap Joint will be furnished with 0.25 (6.35mm) raised face, which is not included in ‘Thickness’ (C) and ‘Length through Hub’ (Y1), (Y3).
    2. For Slip-on, Threaded, Socket Welding and Lap Joint Flanges, the hubs can be shaped either vertical from base to top or tapered within the limits of 7 degrees.
    3. Blind Flanges may be made with the same hub as that used for Slip-on Flanges or without hub.
    4. The gasket surface and backside (bearing surface for bolting) are made parallel within 1 degree. To accomplish parallelism, spot facing is carried out according to MSS SP-9, without reducing thickness (C).
    5. Dimensions of sizes 1/2 through 3 1/2 are the same as for Class 400 Flanges.
    6. Depth of Socket (D) is covered by ANSI B 16.5 only in sizes through 3 inch, over 3 inch is at the manufacturer’s option.

    1.Supply Flange Dimension DN15 - DN2000 (1/2" - 80"), Forged Flange.
    2.Material Carbon Steel: ASTM A105, A181, A350 LF1, A350LF2, A350LF3, A36, A234 WPB, Q235B, 20#, 20Mn etc.
    3.Material Stainless Steel: ASTM A182 F304, F304L, F316, F316L, F321 etc.
    4.Flanges Anti Rust: Anti Rust Oil, Black Paint, Yellow Paint Coating, Hot Dipped Galvanized, Cold Galvanized etc.
    5.Monthly Output: 3000 tons per Month.
    6.Delivery Terms: CIF, CFR, FOB, One 20GP Can Fill in Flanges within 18 - 27 tons.
    7.Payment Terms: Wire Transfer (T/T), Irrevocable L/C at Sight etc.
    8.Minimum Order Quantity: 1Ton or 100Pcs.
    9.Sales Country and Region: More than 30 Countries and Areas.
    10.Quality Guarantee: EN10204 3.1 Certificate, Mill Certificate, Retested Certificate, Free Replacement Service.

     

Send your message to this supplier
To:  

Hebei Jinsheng Pipe Fitting Manufacturing Co., Ltd

* Content:  

For better quotations, include:

- A self introduction

- Special requests, if any

Quantity:  

  
You May Like
Not exactly what you want? One request, multiple quotations Get Quotations Now >>